If the house is only to be displaced, it must be determined whether it is detachable or not. The welded one cannot be disassembled according to the box. Generally, it is not welded. First, the water and electricity system of the Mining accommodation container is disassembled. Each room is tightly connected and must be dismantled beforehand.

Then remove the screws used to connect each Mining accommodation container, which must be detached one by one from top to bottom. If the site is not going to be used again, the previous steps are still the same.
The next step is to split each box. In this process, first remove the color steel panels on the surface, then the top layer of roof steel plates, and then the surrounding steel columns. However, it is necessary to ensure that the interior decoration cannot Attach the column and panel, so that it can be restored to the same as when it was first assembled.
Mining accommodation container can meet the requirements of super height and super span: light steel structure material has uniform structure, high strength and high elastic modulus, and its density to strength ratio is much smaller than that of concrete and masonry. Under the same stress condition, light steel structure The self-weight is small, so that it can be made into a light steel integrated house with a large span and a high height.