Treatment measures for water leakage in container houses
Release time:
2022-08-26 16:28
1. Waterproof membrane
After cleaning the base layer, brush adhesive glue on the reverse side of the coil and the base layer, paste and roll from far to near according to the elastic reference line, and then inspect the seam end and do the water storage test after completion. Depending on the environment and climate of the project site, container manufacturers will also have certain differences in the thermal insulation materials used for thermal insulation.
2. Coating waterproof
Take "one cloth and two coats" as an example: after cleaning the base layer, apply a full coat of paint, after drying to form a film, lay a layer of glass fiber cloth matrix reinforcement, and apply a full layer of paint on the flattened surface to fix it , the container manufacturer reminds to carry out the next roof waterproofing construction after drying. The interior of the container is sprayed with polyurethane foam, and glass rock wool panels are installed for moisture-proof, anti-corrosion, heat insulation and sound insulation.
3. Laying a rigid waterproof layer
Professional container manufacturers say that the construction should be carried out about two days after the completion of the first flexible waterproof layer, mainly using high-grade fatty acid mortar waterproofing agent, cement, sand, fine stone aggregate, and fiber as the basic materials, and the thickness of the waterproof layer should be The requirements of container manufacturers are the main ones.
Previous Page
Next Page
Previous Page
Next Page
